Supershape e-Rally SW Skis + Protector PR 13 GW Bindings

EMC

Energy Management Circuit, the world's only electronic ski dampening system. When the ski bends and vibrates, it takes the kinetic energy in the ski and transfers it into electrical energy, which is then used to absorb negative vibrations for a more stable experience. Smooth skiing and exceptional edge grip, whatever the conditions.

Crossforce Carbon Construction

Crossforce Carbon Construction is a unique construction method where the top sheet is removed under the binding, exposing a carbon wrap which the binding is mounted directly onto. Better power transmission of forces onto the slopes.

Better Balance

Current base binding systems provide a constant height difference between heel and toe. As a result, larger ski boots have a flatter ramp angle and smaller ski boots have a steeper ramp angle than average size ski boots. The inclined Better Balance PR Base solves this problem by providing a constant ramp angle for all boot sole sizes. The ideal value of 0.75 degrees ensures that all skiers enjoy the same mechanical advantage for easy turn initiation and stability at high speed.

Protector

Thanks to its Full Heel Release (FHR), vertical and lateral, the Head’s Protector binding can reduce the risk of injuries for both the knee and the lower leg. The reduced release values in forward and especially in backward twisting falls assure less stress for your knees and safer skiing. Conventional bindings offer only vertical release at the heel. Protector bindings offer Full Heel Release (FHR) - releasing 180 degrees (laterally and vertically). 7mm of bi-lateral movement absorbs all impacts on the binding and avoids pre-releases. The 30 degrees rotation is then only initiated when the loads are too high, and the ski boot is released.