snowboarders walking down lane wearing snowboard clothingsnowboarders walking down lane wearing snowboard clothing

Snowboard Clothing Buying Guide

We take clothing seriously here at Ellis Brigham because it doesn’t matter how much you’ve spent on a shiny new hardware set-up, if your clothing sucks, so will your riding day. In fabric technology, waterproof is easy (plastic bags are waterproof), breathable is easy (cotton is very breathable) but waterproof & breathable is more complex. Remember that without good breathability, body vapour condenses on the inside of a waterproof jacket and you will quickly become wet and stay wet.

This guide will give you an idea of the features you can find on snowboard clothing and what they do to make your day more comfortable, that way you can make an informed decision when looking to invest or upgrade your snowboard outfit.

Snowboarder riding wearing all yellowSnowboarder riding wearing all yellow

Fabric

At Ellis Brigham, entry-level clothing will have minimum waterproof/breathable values of 5,000mm and 5,000g, mid range clothing fabrics rate 10,000mm/10,000g with the best performing fabrics delivering 20,000mm/20,000g. GORE-TEX test their fabrics using a different method but they outperform most on the market and deliver waterproof and breathable levels far above 20,000mm/20,000g. Note that sewing a garment together puts holes in the waterproofing! Manufacturers combat this by factory sealing the inside face of the seams using narrow waterproof tape. Mid range clothing will have all critical seams sealed whilst top end clothing will be fully taped.

Waterproof

Waterproofing is rated using a ‘hydrostatic head’ test where a fabric’s resistance to water pressure from a vertical column of water is rated in millimetres… giving a water resistance rating of, for example, 10,000mm. Some call fabrics with a hydrostatic head of 1,000mm waterproof but in a real world environment wear and pressure would make such fabrics leak quickly.

Breathable

Breathability or MVTR (Moisture Vapour Transmission Rate) is measured by the rate at which water vapour passes through a square metre of fabric over a 24 hour period. This gives a breathability rating of, for example, 10,000g/m2/24 (often abbreviated to 10,000g). You will see us abbreviate fabric performance further to 10k/10k for example… but you will get what this means now won’t you!

blue fabric with water droplets on  itblue fabric with water droplets on  it

If you spend a lot of time riding deep snow in variable and wet conditions and hike in the backcountry a lot then you need a fabric with a high waterproof & breathable rating. Look to wear a layered clothing system of wicking base layers to drive moisture away from your skin and out through your outer layers, mid layer fleece or in coldest weather Primaloft or down fill jacket, topped with a high performance waterproof and breathable outer layer. GORE-TEX fabrics rule in this high-end outerwear category.

If your aspirations are less extreme and you rock the resorts a couple of times a season and play on the pistes and lift accessible off piste, then you can rely on any of the clothing in our range to deliver the performance and looks that you’ll want. Under your outerwear a clothing system is still the best way to go, wicking base layers (thermal underwear) are always better than a cotton tee and a thin fleece mid layer is much better than a cotton hoodie.

Features of a Snowboard Jacket

Other than all of this waterproof/breathable performance and layering systems tech talk, there are some basic features to look out for on your snowboarding jacket:

  • Hood - this is a welcome feature when the wind howls on a long lift, make sure it's adjustable so you can cinch it in when you need to.
  • Pit zips - ventilation is great for dumping hot moist air whether you are hiking up to 'earn your turns' in the backcountry or overheating your way through your first lessons on piste!
  • Snowskirt - an inner snowskirt can stop snow shovelling up your back when you slam.
  • Inner security pockets - as well as inner stash pockets will help you keep things safe and organised.
  • Outer pockets - will keep things close to hand but do make sure they have a button down flap or zip to stop your belongings falling out mid-session.
snowboard clothing featuressnowboard clothing features

Features of Snowboard Pants

Some key features to look out for on snowboarding pants include:

  • A relaxed fit - Snowboarding pants should fit well but be roomy enough for snowboarding’s all day rigours… and they don’t necessarily have to fit beneath your buttocks!
  • Pockets - Can come in handy but don’t overload them and ensure they have a zip to secure the contents.
  • Inner snow gaiters - Make sure these fit comfortably over your boots to stop snow riding up the inside of your trouser leg.
  • Drawcord at hem - Allows the hems to be cinched up so they don’t get trashed in the après-ride bar floor soup or muddy car park.

Take a look at our other buying guides

Snowboard Buying Guide

Choosing the perfect snowboard can totally transform your experience on the snow. Going from a hire snowboard to your own will allow you progress faster and enjoy it much more.

Read More

snowboarder sliding down a railsnowboarder sliding down a rail

Snowboard Boots Buying Guide

For any snowboarder choosing a pair of snowboard boots is an important decision. They form an integral part of your set-up; influencing performance and comfort.

Read More

Snowboarder sliding on a railwomens snowboarding on bench

Snowboard Binding Buying Guide

Often overlooked, snowboard bindings are vitally important to your setup, delivering power from you into the board. A good pair of bindings will allow you to control your board with ease.

Read More

Snowboarder sliding on a wooden obstacleSnowboarder sliding on a wooden obstacle